How to install the Morgan codec with a Rainbow Runner ?

Online. How to install the Morgan codec with a Rainbow Runner ?

Published on Wednesday, January 15, 1997 by Gideon Ariel
How to install the Morgan codec with a Rainbow Runner ? by Uwe Roeder, a very interesting text about using software codecs coexisting with a Matrox Rainbow Runner.The MJPEG-Software-Codec GuideTake a look at The MJPEG-Software-Codec Guide About the Morgan Multimedia and Paradigm Matrix M-JPEG codecs What are the advantages/disadvantages ? Why should you use another/additional codec ? What is a codec and how does it work ? This text is written for all people who want to use other MJPEG-codecs with their RR. What on earth is a codec ? (Or how does my RainbowRunner work ?) The files need less place on the harddisk and even the data-throughput between harddisk and RR is smaller. Well ok, the quality is less, too, but we can choose our compromise between quality and disk-space ourself. If you want to process a video, you first have to record/capture to a digital video file. With the RR you can choose between recording to a RGB-avi or to a Matrox-MJPG-avi file. The result of your capturing is a video file in the AVI-format with RGB or MJPEG as subformat. The RGB format is a format where the picture data keep uncompressed. On the one hand this means best quality, but on the other hand you have a very high data-rate during capturing/playing and the files are very large. The pictures of MJPEG-avi files are compressed and because of that this format is the better way for us to handle video-files on our PC. The identifier-tag of that codec will be written into the avis file-header. If you compress (and save) your file with the Matrox-MJPEG-codec the id-tag is “dmb1” again, but if you have chosen e.g. the “Indeo 5.0”-codec, the id-tag will be “IV50”. After processing your avi, when creating a new avi, the video-editing software lets you choose one of the VIDC.xxxx codecs to (re)compress the data. The Matrox-MJPEG-codec can be found at VIDC.dmb1=….RRicm.dll. Whenever you want to play a Matrox-MJPEG-avi with the MediaPlayer or you want to process it with any video-editing software, this driver ,called codec, will be activated for decompressing the pictures. Then they have a look in the system.ini to the [drivers32] section and watch the VIDC.xxxx settings to see which driver must be used to process the file. The compression is done during capturing in realtime by a Zoran-chip on the RR. Your captured video file contains an identifier (called FourCC) in its header that shows the subformat. For Matrox-MJPEG the identifier tag is “dmb1”. If you open a avi file, the Video-for-Windows routines examine the avi file header and read this identifier tag at first. Interesting excursion: If you disable the VIDC.dmb1 setting by inserting a semicolon before its entry in the system.ini, the video-editing software will still be able to handle avi-files with the dmb1-tag, and both the ActiveMovie-Player and the Matrox PC-VCR software can play and output those files ! We even can record avis with the PC-VCR and other capture programs without the system.ini entry. The ActiveMovie-routines (and all programs making use of them like Matrox PC-VCR, MediaStudio 5, etc.) use the hardware decompression (Zoran-chip) for all MJPEG-compressed avi files containing the dmb1 (Matrox) tag independent of any system.ini settings, too. Lets keep in mind that the MJPEG-format is a standard format and not a special Matrox format. OK, let us draw some conclusions. Whenever we record a MJPEG-avi file with the RR it contains the dmb1 tag independent of any system.ini settings. Why should I use another codec ? If you are satisfied with your system and with the results of your work with the RR, I guess there is no need to change the system. I recommend to use the Morgan Multimedia codec because of its better quality. You have many possibilities to influence the performance and quality of this codec by choosing between different numerical methods and activating hardware support (MMX, 3Dnow). The Morgan- and the Paradigm-codec produce MJPEG-avi files (with a higher quality and certainly higher data-rate if you want). If your system is fast enough, you can improve the quality of your videos and reduce artefacts. Some actions are faster with those codecs and some not… The “snowy-frame” problem is a bug in the Matrox-MJPEG-codec, which appears on some Millennium II+RR systems. If a program opens a Matrox-MJPG avi and gets the pictures to recompress them or to show them in the timeline (MSP5/Premiere) the codec produces corrupted (snowy) frames although the avi-file is ok. There are two groups of RR-users who should use one of the software codecs. Windows NT users and users of a Millennium II+RR having trouble with the “snowy-frames” problem. Windows NT users suffer from the NT-drivers lack of MJPEG-support. With the software-codecs they get the possibility to process and playback their MJPEG-videos in NT. They still have to record the MJPEG-videos with Windows 9x. There are some different ways to install the drivers depending on your needs. After that you have many possibilities how to combine the codecs in your system. At first you have to install the additional codec(s). (Paradigm: Do not use the secondary setting.) You can replace the Matrox-codec by the Morgan-codec (recommended method) You must make the following changes to the system.ini: ;VIDC.dmb1=C:\PROGRA~1\MATROX~1\RAINBO~1\RRIcm.dll vidc.mjpg=m3jpeg32.dll [drivers32] The drivers “user FourCC”-field must be enabled and set to “dmb1”. After that you can work with your RR like before but without “snowy-frames” and with better quality (“Integer” or “Float” method for “Compression” in Morgan codec settings and “Higher Quality” in Paradigm codec settings) . You dont have to patch any avi-files. Avi-files played with ActiveMovie, Matrox PC-VCR or MSP5 (best Preview) make use of the RRs hardware-accelleration and can be recorded on tape etc. You can replace the Matrox-codec by the Paradigm-codec You must make the following changes to the system.ini: ;VIDC.dmb1=C:\PROGRA~1\MATROX~1\RAINBO~1\RRIcm.dll vidc.dmb1=pmmjpeg.dll [drivers32] And you must make an additional entry to the registry with regedit: Entry: Compress FourCC=31626d64 (hex) Path: HKEY_CURRENT_USER\Software\Paradigm Matrix\Software M-JPEG Codec 64=d 6d=m 62=b 31=1 => 31626d64=dmb1 With this setting it is very simple to work. You have to install the driver, edit the system.ini and registry once and you will not have to change any settings or fileheaders in future. You only have to remember that your new processed file cant be longer than 2 GB in order to be played with the RR. I tried to play a video project with the MSP 5, but I didnt manage it. I only was able to create a avi-file. This limitation is a great disadvantage. If you are processing only small files, this is no problem for you and this way works fine. If you record to a MJPEG-file the dmb1-tag is set by the Matrox capture driver indepent from these settings. If you process your videos with MSP5 or Premiere the Paradigm-codec is used to decompress the files. If you create a new avi-file from your video-project and choose the Paradigm-codec, the registry setting makes the Paradigm-codec write the Matrox dmb1-tag in the avi header. You can play your new file with the Matrox PC-VCR with the hardware acceleration of the RR. The Matrox-codec is disabled and the Paradigm-codec is made responsible for all avi-files with the Matrox dmb1 identifier tag. You can use the Morgan- and the Paradigm-codecs as additional codecs Your system.ini entries must look like the following: VIDC.dmb1=C:\PROGRA~1\MATROX~1\RAINBO~1\RRIcm.dll vidc.MJPG=m3jpeg32.dll vidc.dmb2=pmmjpeg.dll [drivers32] Compress FourCC = 32626d64 (hex) HKEY_CURRENT_USER\Software\Paradigm Matrix\Software M-JPEG Codec\ Registry: This value stands for ‘dmb2’ ! Don’t confuse with 31626d64 for ‘dmb1’ !!! The Morgans “user FourCC”-field has to be disabled or if you like to enable it set it to “MJPG”. If you use avi.exe you must change the content of the Morgan-button from “mjpg” to “MJPG”. “mjpg” was used in earlier driver versions but it has changed to “MJPG” because of the specs. For playback it is better to use the Matrox-identifier; for further processing you should use the other identifiers. The disadvantage of this method is the changing of the file-header, but I think that this is no problem with avi.exe. The advantage is the great flexibility, because you can decide which codec will be used for a file. If you have chosen the Morgan- or Paradigm-codec, your generated avi-file contains the dmb2 or MJPG identifier in the file-header. You must change this with avi.exe to dmb1 (Matrox) to play the file with the RRs hardware accelaration. Otherwise the file will be played back only with the power of your CPU and it could be, that your system is not fast enough for 25/30 fps. You can play your video-projects with MSP and do not need to create avi-files. So you are not limited to 2 GB with your projects. If you want to create avi-files from your project you can choose the compression. This can be the Matrox, Morgan, Paradigm (all MJPEG) or some other codec (like Intel Indeo). All codecs are active and can be used to decompress and compress avi-files. You can define which codec will be used for which file by changing the identifier tag in the file header of each file. If you want the avi to be decoded by the Matrox-codec the identifier tag must be “dmb1”. If you want it to be decompressed by the Paradigm-codec the id-tag must be “dmb2” and “MJPG” for the Morgan-codec. You should use the avi.exe Windows program to change the identifier. General info about using the other codecs When creating avi-files from your video-projects with the any codec, you can choose the compress-quality with a slider. If you want the avi be processed with other programs later, you can choose the maximum setting, but you have to be aware of the longer filesize and greater data-rate. It could be that your system is not fast enough to playback those avis in realtime. When we use MJPEG we must know that we pay for the small file size and the smaller datarate with picture-quality. This is typical for the JPEG-compression. You must keep in mind that the MJPEG format is a compression format. MJPEG stands for Motion JPEG. I guess all of us have used pictures in the JPEG (.JPG) format. The file size is very small after converting a tiff (uncompressed) to JPG and the quality is decreased. The more you compress the less is the quality. If you want to increase the quality of your captured videos you can try to use Doc Mordrids overclocking method, which is described at TIGRR. If you are not familiar with editing the registry you can use the tool MJPG.EXE to change the registry-settings. Last edited 19.11.1998 by Uwe Roeder.